components product information connector new 1/4 mb-0177-1 december 2008 jae pmk div. proprietary. copyright ? 2007 ? no. of contacts :8 pos.+2pos. (d-sw) ? contact resistance: 100m ohm max. ? dielectric withstanding voltage : ac500vr.m.s. per minute ? operating temperature: -25 deg. c to +85 deg. c ? storage temperature: -10 deg. c to +60 deg. c features st9 series microsd tm memory card connector general specifications ? push-push structure normal mounting type co nnector for microsd tm memory cards, standardized by sda tm . ? balanced emi countermeasure by the 4 hold-down points ? slim design with 1.45mm hei ght, 13.7mm width and 15.2mm depth (depth including card: 17.1mm) ? supply for automatic mounting in embosse d tape (compatible to second reflow) ? with card insertion detection structure (d-sw), normally open ? with card lock structure ? 1mm push stroke and 3.3m m card eject length ? countermeasure to prevent the card from popping out. ? rated current: 0.5a/ per pin ? rated voltage: 10v/ per pin ? insulation resistance: 1000m ohm mi n. ? lifetime: 10,000 times ? temperature rise: 30 deg. c rise max. rohs compliant < outline > the st9 series are one-piece type external connectors for micro sd tm card. high density smt mounting type low profil e connector compatible with microsd tm cards, standardized by sda tm (sd card a ssociation) as a compact card for various portable devices. * microsd tm is a trademark of sd card a ssociation.
mb-0177-1 2/4 jae pmk div. proprietary. copyright ? 2007 terminal: au flash plating over ni housing synthetic resin/ no (ul94v-0) cover frame stainless steel/ terminal area: au flash plating over ni eject bar synthetic resin/ no (ul94v-0) spring stainless steel/ no d-sw contact compliant to finish of signal contact lock stainless steel/ no cam follower stainless steel/ no ordering information st9 s 008 v 4 a (r1500) 4: au 0.5 um/ au flash plating v: smt mounting with h/ d no. of contacts series connector type s: non-zif structure a: modification code reel part number (note 3)
mb-0177-1 3/4 jae pmk div. proprietary. copyright ? 2007
mb-0177-1 4/4 jae pmk div. proprietary. copyright ? 2007 japan aviation electroni cs industry, limited product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2763 fax: +81-3-3780-2946 notice: products shown in this leaflet are made for the applications listed below. however, if the above-mentioned prod ucts are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact jae for further information. recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), av devices, household applications, fa devices, etc. * the specifications in this brochure are subject to change w ithout notice. please contact jae for information. note 1. this area should not touch the case in order to be free of load. note 2. vacuum area note 3. an embossed tape reel contains 1,500 pcs. please contact us for details on embossed tape specifications. applicable board dimensions (for reference) unit: mm
|
